WEEK 12 : FYP 2 : DESIGN POSTER AND SLIDE FOR FYP PRESENTATION

Title             : Make a poster and slide for the fyp presentation
Objective     : To design a poster and slide about whole project background

Content        : 1) Explain about the project
                      2) Clearly the main objective
                      3) Design the block diagram
                      4) Flow chart about the project from beginning until the end
                      5) Make a result and analysis
                      6) Conclusion about this project

Poster design :-

Figure 1 : Poster design

Slide :-

Figure 2 : Slide for presentation

Analysis:-

From the poster and slide it will describe everything about the project. The assessor can understand about the project from the poster. Block diagram can explain more clearly based on the block show. The block diagram shows the input and the output from the PIC. The conclusion is concluding about the whole project.

Conclusion :-

As the conclusion the poster and slide is the most important thing to describe about our project. When the assessor read all the data and information on the poster and slide it will give them satisfaction and just ask when they don’t know certain about the project.

WEEK 11 : FYP 2 : TROUBLESHOOT ALL PART OF THIS PROJECT

Title             : Troubleshoot all part which is PIC circuit, LDR sensor circuit and relay circuit
Objective     : To make sure all the circuit is functioning
Content        : 1) Testing the functionality of PIC circuit
                      2) Testing the functionality of relay circuit
                      3) Testing the functionality of LDR sensor

Result:-

 

Figure 1 : Testing circuit

WEEK 10 : FYP 2 : CONSTRUCT FLEXIBLE TRAFFIC LIGHT MODEL

Title             : Develop flexible traffic light model

Objective     : To ensure that the flexible traffic light model is built according to the draft

Content        : Construct the flexible traffic light model using plastic base

Result :-

Figure 1 : Complete model

 Analysis:-

From the picture above shows the complete model of flexible traffic light. The design is basically get from the internet based on the existing product. The wire more important because it can make short circuit, it will damage for this project. The model also small, so it is easy to carry and testing the hardware.

Conclusion :
To make some design, we must take note all this aspect such as material that will be used, their costing, product, sizing, item endurance and also their usage. If we miss some of that part, the design will not completely useful.

WEEK 9 : FYP 2 : LDR CIRCUIT PROGRESS

Title           : Making and testing the light dependent resistor (LDR) sensor program

Objective   : 1) To develop coding of light dependent resistor (LDR) sensor

                   2) To ensure the coding can be run properly with the hardware

Content      : 1) Develop coding for light dependent resistor (LDR) sensor

                    2) Testing the coding that can be link with the circuit or not

Result :-

Figure 1 : LDR circuit

Analysis:-

The hardware development is suitable matches with the software; it proves when the hardware function, the coding for normal and flexible mode is functioning.

 
Conclusion:-

As a conclusion the result achieve what we expected, and the circuit is function when it matches with the software. The combination of the hardware and software is important to produce the output based on we need.

WEEK 8 : FYP 2 : RELAY CIRCUIT PROGRESS

Title           : Making and testing the relay circuit and program
Objective   : 1) To develop coding of relay circuit for normal and flexible mode                            
                   2) To ensure the coding can be run properly with the hardware

Content     : 1) Develop coding for normal and flexible mode

                   2) Testing the coding that can be link with the circuit or not

Result:-

Figure 1 : Relay circuit

Analysis:-

The hardware development is suitable matches with the software; it proves when the hardware function, the coding for normal and flexible mode is functioning.

 
Conclusion:-

As a conclusion the result achieve what we expected, and the circuit is function when it matches with the software. The combination of the hardware and software is important to produce the output based on we need.

WEEK 7 : FYP 2 : PIC CIRCUIT PROGRESS

Title          : Making and testing the PIC circuit and program
Objective  : 1) To develop coding of PIC circuit for normal and flexible mode                            
                  2) To ensure the coding can be run properly with the hardware

Content     :1) Develop coding for normal and flexible mode
                  2) Testing the coding that can be link with the circuit or not

Result:-

Figure 1 : PIC circuit

Analysis:-

The hardware development is suitable matches with the software; it proves when the hardware function, the coding for normal and flexible mode is functioning.

 
Conclusion:-

As a conclusion the result achieve what we expected, and the circuit is function when it matches with the software. The combination of the hardware and software is important to produce the output based on we need.

WEEK 6 : FYP 2 : TEST OR TROUBLESHOOT INTERFACING CIRCUIT

Title           : Test or troubleshoot the interfacing circuit between PIC circuit with output circuit
Objective   : 1) To know the circuit function properly
                   2) To troubleshoot when the circuit have a problem

Content/Procedure:
• Burn the program into PIC circuit
• Check the program related or not with PIC circuit
• Interface the PIC circuit with output circuit
• Check again and ensure the overall circuit working as expected and is same with simulate in proteus

Analysis:-

For this project, at the PIC circuit I burn the program as directly and not use other out interface component because in software MPlab IDE have a PICkit2 software and just connected the wire from computer to PIC circuit but make sure at the PIC circuit have a pin IDC10 connector with PIC and it one of component from In Circuit Serial Programing ( ICSP ).

Conclusion:-

Circuit is working properly and knows how to burn the program into PIC, troubleshoot circuit also interfacing PIC circuit with output circuit have done. So, in this task the objective is achieved.